This is the 2 inch suspension lift with the 32x11.50x15's
|
|
|
The 32's will fit the grizzly wheels
The only problem with the 32's on grizzly wheels is on the rear I had to use a small wheel spacer to space the tires out enough to get passed the top spring perch. |
|
|
|
Spare Tire needed a few modifications
On the spare I used a 1/4 inch spacer to space the tire out far enough so it would not rub against the tailgate hinges. I also had to remove the 5 rubber bumpers the the stock size tire rests against. The third brake light had to be raised about 1 1/2 inches via spacers to clear the larger tire. |
Here is a side shot
As you can see, this wheel/tire combination works well. |
|
|
|
Sport Pedals
I picked up these sport pedal overlays at a local rod show. |
CB mount
I mounted my CB under the dash. There is just enough room for the seat to raise and clear the CB. The antennea is mounted on the rear bumper. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
